浮法退火窯的用途是使浮法玻璃從錫槽出來的溫度有控制地逐漸冷卻，使其產生的殘余應力不超過允許的范圍，以滿足切割和運輸要求。退火窯由A區、B區、C區、D區、R區、E區、F區等部件組成。浮法退火窯輥道的用途是借助于玻璃帶與輸送輥道面之間的摩擦力，把連續玻璃帶從錫槽拉引出來，經過渡輥臺之后，順序通過退火窯的各區，同時把玻璃帶連續輸送到該生產線冷端。
The float glass annealing lehr is used to control temperature of glass ribbon out of tin bath and lower it, so that caused residual stress is not over allowable value to meet with requirements on cutting and transportation. It is composed of A zone, B zone, C zone, D zone, E zone, F zone and etc. The annealing roller is used to draw the continuous glass ribbon out of tin bath by friction between glass ribbon and conveying roller, after passing through lift-out roller and into each zone of annealine lehr in order, meanwhile, to deliver glass ribbon to the cold end of this production continuously.
主要用戶：Main users
孟加拉250t/d浮法生產線Bangladesh 250t/Float Glass Production Line
洛玻集團龍昊玻璃有限公司Lonhao Glass Co.,Ltd. of China Luoyang Float Glass Group Co., Ltd
旭硝子浮法玻璃（蘇州）有限公司Float line of Asahi Float Glass (Suzhou) Co., Ltd.
蘭州晶亮玻璃有限公司Lanzhou Jingliang Glass Co., Ltd.
陜西神木瑞誠實業有限責任公司Shangxi Shenmu Ruicheng Co., Ltd.
成都南玻玻璃有限公司South Glass Group Ltd., Chengdu
沙河市安全實業有限公司Shahe Security Industry Co., Ltd.
印尼浮法玻璃生產線Indonesia Float Glass Production Line 東莞南玻太陽能玻璃有限公司South Glass Solar Glass Co., Ltd Dongguan |
